Jiangsu Baoye Heavy Engineering Technology Co., Ltd.
Jiangsu Baoye Heavy Engineering Technology Co., Ltd.
Add to Cart
Introduction
Drum-shaped gear coupling has the relative offset performance of two axes compensated in a certain angle direction, and works long distance with the middle axle. It is suitable for connecting horizontal two coaxial lines with a certain angular displacement of the transmission shafting.
Advantages of gear couplings
1. Strong carrying capacity. Under the same outer diameter of the inner sleeve and the large outer diameter of the coupling, the bearing capacity of the gear coupling is on average 15 to 20% higher than that of the straight gear coupling
2. Large amount of angular displacement compensation. When the radial displacement is equal to zero, the allowable angular displacement of the spur gear coupling is 1 °, and the allowable angular displacement of the gear coupling is 1 ° 30 ', an increase of 50%. Under the same modulus, number of teeth, and tooth width, the allowable angular displacement of the drum teeth is greater than that of the straight teeth.
3. The tooth end of the outer gear sleeve is in the shape of a horn, which makes the assembly and disassembly of the inner and outer teeth very convenient.
4. Transmission efficiency is as high as 99.7%.
Application of gear coupling
It is suitable for low-speed and heavy-load conditions, such as metallurgy, mining, lifting and transportation industries, and also suitable for shafting transmission of various types of machinery such as petroleum, chemical, general machinery